Table 18. Front Panel Leds - Olicom CrossFire 8600 Manual To Operations

Status LEDs
LED
PWR
DIAG
ERR
TX
RX
ATTACH
INS
(left LED of
port)
ACT
(right LED of
port)

Table 18. Front Panel LEDs

CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641
State
The switch is not connected to a power outlet, or
Off
the power supply is faulty.
On The switch is receiving power.
On The DIAG diagnostics LED is on during the
power-on self-test. During download of a new
software image, the DIAG LED blinks to indicate
the clearing (slow blink) and reloading (faster
blink) of FLASH memory.
The ERR LED is off during normal operation. If
On
the LED turns on, an error has occurred. Power the
switch down and up again. The ERR LED should
not turn on again.
Note that this LED turns on if the switch is
powered from a redundant power supply only.
On or Data is being transmitted to the stack link.
blinking
On or Data is being received from the stack link.
blinking
On A connection has been established to the stack.
The Token-Ring port is inserted into the ring.
On
The port is disabled.
Blinking
On or Data is being transmitted to or received from the
port.
blinking
Meaning
67
Installation