Vlan Configuration Menu - Olicom CrossFire 8600 Manual To Operations

88
•
Address filters. Domains have no effect on address filters. For example,
suppose you create two domains: one containing ports 1–8 and the other ports
9–16. If you add an address filter to ports 7, 8, 9, and 10, the filter will work
properly even though it applies to ports in other domains.
•
CrossLink. All ports in a single CrossLink must belong to the same CRF.
Therefore, the console software prevents you from defining a CrossLink
connection that includes ports in different CRFs. It also prevents you from
assigning the ports in an existing CrossLink to different CRFs.

VLAN Configuration Menu

This menu is accessed by from the Configuration menu. See the section "VLAN
Support" on page 26 for a discussion of VLANs.
More information on the various submenus follows these brief explanations.
VLAN Configuration...
Displays the VLAN Configuration menu, which you use to define and administer
BRFs and CRFs in the switch.
Local VLAN Port Configuration...
Displays the Local VLAN Port Configuration screen, which you use to view and
configure port assignments to CRFs.
CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641 Switch Configuration