Built-In Port Counters - Olicom CrossFire 8600 Manual To Operations

•
The Statistics Group:
— The Token-Ring MAC-Layer Statistics Table.
— The Token-Ring Promiscuous Statistics Table.
•
The History Group:
— The History Control Table.
— The Token-Ring MAC-Layer History Table.
— The Token-Ring Promiscuous History Table.
The following groups defined in the RFC 1513 Token-Ring Extensions MIB are
supported in the switch:
•
The Token-Ring Ring Station Group:
— RingStationControl Table does not support sets, only gets.
— Ring Station Table is not supported.
•
The Token-Ring Ring Station Order Group.
You can use an external RMON probe for full RMON support.
Note: Remember to enable RMON Statistics on the SNMP Configuration menu.
Note: Access to RMON data is available only via an SNMP management
application that supports RFC 1757 and RFC 1513. You cannot access RMON via
the console interface of the switch.

Built-in Port Counters

The switch supports a wide range of port counters, which enables you to obtain a
detailed overview of the port traffic. The counters give a comprehensive overview
in the areas of:
•
MAC Layer Counters
•
MAC Layer Error Counters
•
Frame Forwarding Counters
CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641
29
Switch Theory of Operation