Twisted-Pair Cable Pin Outs; Figure 25. Straight-Through Cable; Figure 26. Data Connector-To-Rj-45 Straight-Through Cable - Olicom CrossFire 8600 Manual To Operations

214

Twisted-Pair Cable Pin Outs

When connecting devices to the token-ring ports on the switch, you must use a
straight-through cable. Diagrams of these cables follow.
Straight-Through 100-Ohm/120-Ohm Cable
The switch RJ-45 connector makes ground available on the shield and on pins 1, 2,
7, and 8. Shielded cables will provide continuity for ground to any shielded
connector on the other end of the cable.

Figure 25. Straight-Through Cable

150-Ohm IBM STP Data Connector-to-RJ-45 Straight-Through Cable

Figure 26. Data Connector-to-RJ-45 Straight-Through Cable

CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641 Cable and Pin Information