Password Menu - Olicom CrossFire 8600 Manual To Operations

Password Menu

This menu is accessed from the Configuration menu.
Use the Password menu to add, change, or delete a password. If you establish a
password, users must enter it to access the console menus. If there is no password,
just press
ENTER
Set Password
Establishes or changes the password.
Delete Password
Deletes the password.
The system prompts you to enter the present password before it allows you to
change or delete the password. If you are establishing a new password, press
at the Set Password prompt.
The password is saved across warm boots and power cycles.
Note: If you have forgotten the password, you can delete it by depressing the
unlabeled SysReq button on the front panel of the switch for one second, releasing
it, then selecting Point 4. Clear the system password .
CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641
at the password prompt.
129
ENTER
Switch Configuration