Port Filtering Attributes Screen - Olicom CrossFire 8600 Manual To Operations

Port Filtering Attributes Screen

Before entering the Port Filtering Attributes screen, you will be prompted for a
port to modify.
Class
For the selected port, use the Class column to select a class to modify.
Block
The Block column may have the following values:
•
All —Block all frames in this protocol class.
•
SR — Block all source-routed frames in this protocol class.
•
NSR — Block all non-source-routed frames in this protocol class.
•
None — Allow all frames in this protocol class (default value).
SRT
The SRT column may have the following values:
•
Yes — Allow transparent bridging for frames in this protocol class (default value).
•
No — Disallow transparent bridging for frames in this protocol class. If No is
selected, only source-routed frames can be bridged between CRFs for this
protocol class.
CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641
123
Switch Configuration