Current Spanning Tree Information Screen - Olicom CrossFire 8600 Manual To Operations

104
STP Mode
The port's spanning tree mode. Possible values are forwarding , blocked , and auto .
If the TrCRF to which the port belongs is participating in the spanning tree protocol,
then auto is the default and the selected protocol will be used to determine whether
the port is forwarding or blocked. If the TrCRF to which the port belongs is not
participating in the spanning tree protocol, then forwarding is the default.
More
To view more ports in the table.
Change
To change or add values to specific ports.

Current Spanning Tree Information Screen

A summary of STP information for each port is available from the Current
Spanning Tree Information screen. See Chapter 7, "Monitoring the Network with
the Console" on page 172 for more information.
CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641 Switch Configuration