Station-Cport Information Screen - Olicom CrossFire 8600 Manual To Operations

163

Station-CPort Information Screen

The Station-CPort Information screen is shown below.
Station Requested Access Protocol
Protocol requested for station access. This field displays the value of the Access
Protocol Request subvector X'0E' transmitted in the Registration Request MAC
frame. Possible values are TXI and TKP .
Station Access Protocol Response
Response to protocol request. This field displays the value of the Access Protocol
Response subvector X'0F' received from the Registration Response MAC frame.
Possible values are Access Denied and FDX+Wire Fault .
Station Individual Address Count
This field displays the number of individual addresses supported by the MAC and
used in the Individual Address Count subvector X'21'. This field will always
display the value 1 .
Station Phantom Drive Support
This field displays the MAC's support of Phantom Drive and Wire Fault detection.
It indicates the value of the SPV(PD) variable and the value of the Phantom
subvector X'0C' used in the Registration Request MAC frame. This field will
always display Ph Drv+Wire Fault for Phantom Drive and Wire Fault support.
CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641 Monitoring the Network with the Console