Table of Contents
Advertisement
92
VLAN Parameter Configuration for TrBRF Screen
Use the VLAN Parameter Configuration for TrBRF screen to add or change a
BRF. Note that the trbrf-default cannot be deleted. Also, the trbrf-default cannot be
assigned new BRFs. The BRF screen is shown below.
The following information is displayed on this screen:
VLAN ID
Numeric ID of the BRF. Possible values are 1 through 1005 . Values 1002 through
1005 and 1 are reserved for the default BRFs and CRFs.
VLAN Name
ASCII name associated with the BRF. Up to 32 characters are allowed.
State
Current state of the BRF. Possible values are Operational and Suspended. BRFs in
operational state are functional. BRFs in suspended state do not pass packets. The
default is operational.
MTU
Maximum Transfer Unit of the BRF (maximum size of the information field in
transmitted packets). Possible values are 1,500 , 4,472 (default), 8,144 , and 17,800 .
The actual value used depends also on the value configured for the port (the smaller
value is used).
CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641
Switch Configuration
Advertisement
Table of Contents
Troubleshooting
