Filters And Port Security Menu - Olicom CrossFire 8600 Manual To Operations

116
Note: To restrict access from one segment to an entire segment—not just an
address—see the "VLAN Configuration" section in this chapter.
The following address filtering menus are used to set up address filtering.
Additional information on address filtering is provided as the following filtering
menus are presented.

Filters and Port Security Menu

Use the Filter & Port Security menu to access the filtering menus. This menu is
accessed from the Configuration menu.
Configure Filters...
Displays the Configure Filters screen, where you can establish specific filtering
based on MAC addresses.
Configure Port Security Mode...
Displays the Configure Port Security mode screen, where you can establish
address security at specific ports.
View Port Filters...
Displays the View Port Filters screen, where you can view port filters for a
specific port.
Protocol Filters...
Displays the Protocol Filters menu.
CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641 Switch Configuration