Table 22. Changing And Saving Switched Port Analyzer Settings - Olicom CrossFire 8600 Manual To Operations

194
The following information is displayed on this screen:
Port Number
Port to which the network analyzer or RMON probe will be attached.
Note: This port should be assigned to its own TrCRF. For information about
assigning ports to a TrCRF, see "VLAN Configuration" on page 87.
Port To Monitor
The port that will be monitored.
Change the current
settings...
Disable the Switched
Port Analyzer port...
Save your changes...

Table 22. Changing and Saving Switched Port Analyzer Settings

Note: It is only possible to monitor ports within a physical switch, and not in a
stack.
CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641
To
The appropriate
parameter...
Port to Monitor
Return
Select
Specify the value.
Specify 0.
Then
Monitoring Port Traffic