General Guidelines - Olicom CrossFire 8600 Manual To Operations

76

General Guidelines

To work within the console menus and screens, follow these guidelines:
•
To select an item on a screen or a menu, highlight it by using the arrow keys
and then press
item—for example, selecting Yes or No or supplying a value —a prompt
appears on the screen.
•
In most cases, new values are saved when you select Return .
•
The More item means there is more information than what is displayed on that
screen. Selecting More and pressing
information.
•
Port refers to the number of a specific port on a switch.
•
Index refers to the numerical order of a list.
•
To return to the main menu from any screen, press
changes made to the screen you were in will not be saved when you do this.
To return to the greeting screen, press
•
To refresh the console screen, press
•
If you are administering switches in a stack, many of the console screens will
prompt for a box number. Enter the number of the box you want to administer.
•
The "VLAN" term in connection with CRF is discussed on page 26.
•
The terms "Virtual LAN" and "domain" are interchangeable.
•
The console automatically returns to the greeting screen after five minutes of
inactivity. Five minutes is the default value. The time can be changed at the
Console Configuration menu as explained later in this chapter. To open the
Console Configuration menu, select Configuration... in the main menu and
then select Console Configuration... in the Configuration menu.
•
For protection against inadvertent or unauthorized access to configuration
screens, you may establish a password that users must enter at the greeting
screen. If no password is configured, just press
presented. To establish a password, see the section "Password Menu," later in
this chapter. To open the Password menu, select Configuration... in the main
menu and then select Password... in the Configuration menu. For more
explanation on the greeting screen, see Chapter 5, "Connecting a Network
Management Console".
CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641
. If you need to specify additional information for that
ENTER
displays the next screen of
ENTER
CTRL-P
.
CTRL-B
.
CTRL-L
and the main menu is
ENTER
. Note that any
Switch Configuration