Checking The Installation; Figure 18. Connecting Using Building Wiring - Olicom CrossFire 8600 Manual To Operations

6. Label this cable.
7. If the switch is rack-mounted, dress the switch end of the cables through a cable
management bracket, if one is present on your rack.
8. To continue installing the switch, continue with "Applying Power".

Figure 18. Connecting using Building Wiring

Checking the Installation

Before you apply power to the switch, inspect the installation thoroughly. Verify
that all cables are installed correctly. Check cable routing, so a cable will not be
damaged or create a safety hazard. Be sure all equipment is mounted properly and
securely.
CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641
63
Installation