Table of Contents
Advertisement
DEC VT520 Keyboard Wedge
(Communication Setup)
This chapter provides the configuration bar codes for the DEC
keyboard Synapse cable:
•
(Catalog No. 2755-HFC-SV2-01)
DEC VT520 Keyboard Wedge Synapse Cable Defaults
Scan the following bar code to set the IBM Keyboard Wedge Cables
to their default values. Defaults are indicated with an asterisk.
Set DEC VT520 Keyboard Wedge Synapse Cable Defaults
Scan this label to set the DEC VT520 Synapse cable to the default
settings shown below.
DEC VT520 Keyboard
Wedge Cable Parameters
Host
Country
Bar Codes with Unknown
Characters
Intercharacter Delay
Parameter Set
Scan the bar code symbols for the settings you need to change.
Default Setting
DEC VT520
North American
Send Bar Codes With Unknown
Characters
5 milliseconds
Parameter Set 1
Chapter
Code on
Page:
4–2
4–2
4–4
4–4
4–5
Publication 2755-6.7
4
Advertisement
Table of Contents
