Adjusting System Parameters And Advanced Controls - Runco Video Xtreme VX-40d Owner's Operating Manual

Use the Configuration menu to
define general operating parameters
and communications with other
projectors and equipment, and to
access other advanced processing
and image adjustments affecting
overall performance. In addition, the
Configuration menu provides access
to diagnostic and calibration tools,
as well as the Service submenu
(password protected).
Keep in mind that settings in the Configuration menu (and its submenus) are typically
"global" settings applied regardless of the type of source your are using. This
characteristic is identified with the (globe) icon alongside the option. NOTE: The
Configuration menu is recommended for experienced users/technicians only.
The first six options in the Configuration menu are explained below:
Language
Choose from available languages to use in the projector's menus. The change will take
effect immediately.
Image Orientation
Set the orientation of the image according to the orientation of your projector. If the
setting is incorrect, projected images will be reversed and/or upside down.
Fade Time
Set how long (in seconds) it takes to gradually dissolve one image into another for a
source switch.
Auto Power-up
Enter a checkmark to enable the projector to automatically power up after losing power
due to a power failure or due to unplugging the projector during operation. Runco
recommends that this be left unchecked, as a power loss in an unattended house will
result in the projector turning on without anyone realizing it is on.
Note that unsaved display adjustments may be lost.
Set Date and Time
Enter/read the current year-month-day and hour-minute-second. Changes here reset the
projector's real-time clock.
Runco VX-40d/-50d/-60d/-80d Owner's Operating Manual
53
Section 3: Operation
3.6 Adjusting System
Parameters and
Advanced Controls
System Configuration
— GENERAL —