Runco Video Xtreme VX-40d Owner's Operating Manual page 112

Appendix D: Optional Input Modules
RGB400 Active Loop-Thru ➤
Input Module
PC250 Analog Input Module ➤
The RGB400 ALT Input Module may be installed in this projector, a Marquee Signal
Switcher, or a Marquee Case/Power Supply. The module receives analog RGB input
signals from computers or other RGB source devices. Video inputs are 75Ω terminated.
Video outputs provide buffered loop-through to another display device.
RGB400ALT Features
• accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or separate
horizontal and vertical sync)
• accepts YPbPr, composite (on green) and Y/C (on red/blue)
• BNC connectors for RGB signal inputs
• buffered loop-through video outputs
NOTE: The audio connectors are not functional.
The PC250 Analog Input Module may be installed in this projector, a Marquee Signal
Switcher or a Marquee Case/Power Supply. The module receives analog RGB input signals
from IBM PC compatibles or Macintosh computers. Video inputs are 75Ω terminated.
Video outputs are provided for buffered loop-through to another display device.
PC250 Analog Features
• accepts VGA or MAC RGB video
• 15 pin D connectors for video
• active loop-through video outputs
NOTES: 1) This interface does not accept VGA and MAC signals simultaneously. 2) The
audio connectors are not functional. 3) Trademarks are the rights of their respective
owners.
104
Runco VX-40d/-50d/-60d/-80d Owner's Operating Manual