Runco Video Xtreme VX-40d Owner's Operating Manual page 41

If you prefer to quickly scroll through a list without first pulling it down, highlight the
option and use ◄ or ►. Press Enter when the desired choice appears.
NOTES:
1) Long pull-down lists consist of two or more "pages." To jump between pages, press
◄ or ►.
2) Press Exit while in a pull-down list to cancel any change.
ACTIVATE THE EDIT WINDOW: To enter or edit text, highlight the desired parameter
(such as a channel name) and press Enter to activate its adjacent edit window. Any
previously entered text is displayed with its first character highlighted in a square cursor,
signifying that this character is ready for editing.
NAVIGATE WITHIN THE EDIT WINDOW: Press ► to move the cursor forward or ◄ to
move the cursor backwards as desired.
EDIT A CHARACTER: To edit a highlighted
character, use ▲ and ▼ to scroll through the
alphabet, numbers, spaces and punctuation
available. When the character you need appears,
press ► to select it — the cursor will move to
the next character of current text, if present.
Note that you can also enter a number directly
from the keypad — it will be accepted and the
cursor will move on.
INSERT A SPACE OR DELETE A CHARACTER: To insert a space at the cursor
location, press FUNCN (or DIS) followed by ►. To delete a highlighted character (or
space), press FUNCN followed by ◄.
FUNCN
PRESS ENTER WHEN FINISHED: To accept edits and leave the edit window, press
ENT (Enter). To cancel changes and return to the previously-defined text, press Exit at
any time.
Enter numbers directly from the keypad in order to specify numbers representing
projectors, channels (source setups) or slots. As each digit is entered, it is displayed
and the cursor moves on. Note that channel numbers are defined with 2 digits—for
example, if you enter only a single digit (such as "7") for a channel number, the channel
will automatically be defined as "07". Enter "07" to utilize this channel.
NOTES:
1) Once you enter the first digit, this digit replaces all old digits.
2) If you press any non-numbered key, the number entered up to that point is accepted
and updated as the new value.
3) Press Exit to cancel editing of numerical values.
Runco VX-40d/-50d/-60d/-80d Owner's Operating Manual
Figure 3.8 Entering Text
FUNCN
33
Section 3: Operation
Editing Text
Editing Numerical Values