Runco Video Xtreme VX-40d Owner's Operating Manual page 35

LENS (Focus, Zoom and Lens Shift)
Press LENS to adjust the image for focus, zoom and horizontal and vertical positioning.
A small window appears on the screen to indicate the type of adjustment taking place.
• FCUS▲ / FCUS▼: Use the FCUS▲ and/or FCUS▼ keys to improve image
clarity.
LENS▲ / LENS▼: Use the LENS▲ and/or LENS▼ keys to adjust the vertical
•
position of the image.
• ZOOM+ / ZOOM-: Use the ZOOM+ and/or ZOOM- keys to achieve the desired
image size.
LENS◄ / LENS►: Use the LENS◄ and/or LENS► keys to adjust the horizontal
•
position of the image.
To shift the lens using the built-in keypad, press the LENS SHIFT button on that
keypad, then use the directional buttons (◄►▲▼) to position the image. Press
Exit when finished.
FUNCS
Press FUNCS to access the projector's help text, internal test pattern and "Auto Setup"
features.
• HELP: Press HELP to display on-screen help text. Press HELP again (or Exit)
to hide it.
TESTP: Press TESTP and then use the left- and right-arrow keys (or press
•
TESTP repeatedly) to cycle in either direction through the test patterns only (no
input). Press Exit to get out of the test pattern mode.
• FUNCN: This is a general-purpose "function" key used in various places throughout
the menu system.
Note: The FUNCN button (on the FUNCS sub-page in the LCD menu) and the
DIS button (next to "0" on numeric keypad) can be used interchangeably.
• CHANL: Press CHANL to access the Channel Selection menu. This menu lets you
select a specific source setup (channel) defined and stored in projector memory.
When you enter a 2-digit channel number (or, if there is a list displayed, highlight
it and press Enter), the display automatically changes and updates according
to the numerous setup parameters defined for that channel. Note that a new
channel is automatically created if you adjust an image from a new source.
NOTE: Channel (CH) key behavior during a presentation depends on whether or
not the Display Channel List option is enabled in the Menu Preferences menu.
You can use the scrollable list of channels when you press CHANL, or you may
prefer to enter the desired channel number "blind;" that is, without on-screen
feedback. Refer to Menu Preferences later in this section.
Runco VX-40d/-50d/-60d/-80d Owner's Operating Manual
27
Section 3: Operation
LENS
FCUS▲ LENS▲
FCUS▼ LENS▼
ZOOM+ LENS◄
ZOOM- LENS►
PAGE 1
FUNCS
HELP TESTP
FUNCN CHANL
AUTO
PAGE 1