Runco Video Xtreme VX-40d Owner's Operating Manual page 52

Section 3: Operation
BLANKING (TOP, BOTTOM, LEFT, and
RIGHT): Crop the image as desired so
that unwanted edges are removed from
the display (changed to black—see right).
Blanking defines the size of the Active Input
Window, or area of interest. The range of
adjustment depends on the source resolution
and other factors.
PLUG & DISPLAY (EDID): By default, a Plug & Play (EDID)
source outputs a signal according to the EDID information
provided by the projector. To override this information and
display in a different format (for example, if your Plug & Play
[EDID] device does not support the projector's resolution and/or
frequency), select the desired Plug & Play (EDID) resolution from
the list.
Any daisy-chained projectors will also display according to the
chosen Plug & Play (EDID) format.
EDID = Extended Display Identification Data standard.
Use options in the Image
Image Settings Menu ➤
Settings menu to alter your
image without affecting its size
or position. Changes made to
the Image Settings menu are
applied immediately and are
saved when you exit the menu
(press EXIT or MENU). Options
not available for the projector
model or source are disabled
and appear dim (gray).
Runco VX-40d/-50d/-60d/-80d Owner's Operating Manual
44