Runco Video Xtreme VX-40d Owner's Operating Manual page 40

Section 3: Operation
Using Slidebars and Other ➤
Controls
Most of the function menus allow you to change settings by using slidebars, checkboxes
and pull-down lists. To select a slidebar, toggle a checkbox status or view a pull-down
list, do one of the following within the function menu:
• Enter the menu option number corresponding to the setting you wish to change
(for example, press MENU 1 3 to select Vertical Stretch in the Size and Position
menu).
• Move the highlight to the option desired and press Enter.
• Move the highlight to the option desired and press ◄ and/or ► to adjust
immediately.
• Bypass the menus entirely and use a single key to immediately access an
adjustment during your presentation. This applies only to options having their
own key, such as Focus (FCUS) or Zoom.
• For "blind" access, hide the entire menu system (see OSD key, above) and/or
direct slidebars activated by their own key (such as Contrast, Brightness, etc.).
Control by using the proper keypress or numerical sequence of key presses.
Once selected, change the setting as desired and press Enter to save and return to
the current function menu.
Slidebars in menus — The current value for a given parameter,
such as size or vertical stretch, appears to the left of its slidebar
icon (adjustment window). This number often expresses a percentage, or it may have
units associated with it (such as pixels or kelvin), depending on the specific option. Press
◄ ► to gradually adjust the setting up or down—both the number and the length of the
bar change accordingly. Hold for continuous adjustment. Or, press Enter to activate a
slidebar text box for specific number entry via the keypad, then press Enter to save or
Exit to cancel.
Checkboxes — Conditions are present if its adjacent
checkbox contains a checkmark. To toggle the checkbox,
highlight it and press Enter, or highlight and use ► to check and ◄ to uncheck. If a
checkbox is numbered, simply enter its number to immediately toggle the checkbox.
Pull-down lists — To see a pull-down list of options available for a given parameter
labeled with a ▼, highlight it and press Enter, or enter the menu option number.
Use ▲ or ▼ keys to navigate up and down within the list (the current choice is noted with
a small ►). Press Enter to choose an option from the list.
32
Figure 3.7 Example of Pull-Down List
Runco VX-40d/-50d/-60d/-80d Owner's Operating Manual