Call Elapsed Timer - NEC Xen Alpha Features And Specifications Manual

C-2

Call Elapsed Timer

Xen Alpha
F This timer appears in the LCD (liquid crystal display) on the Multiline telephone. The timer
EATURE
D keeps track of the amount to time that has elapsed since the call was answered. When the
ESCRIPTION
user hangs up, the timer disappears from the LCD.
S This feature is available for all Multiline telephones.
TATION
A
PPLICATION
O
PERATION
P
ROCEDURE
Not applicable.
!
S
ERVICE
C
ONDITIONS
!
!
!
!
!
!
!
!
Features & Specifications Manual, Call Elapsed Timer
A6-506000-642-02
The call elapsed timer disappears from the LCD when a call is placed on hold (exclusive
and non-exclusive). While the call is on hold, the timer continues counting and is
redisplayed when the call is removed from hold, when the call is transferred and
answered, or when the call is transferred and recalls to the telephone that originated
the transfer.
The elapsed call time is maintained separately for each external line. When more than
one external line is placed on hold, the timer is redisplayed for each call as it is removed
from hold.
During an add-on conference, which includes at least one external line, the elapsed call
time of the last external line that is seized is displayed in the LCD.
The call elapsed timer is not displayed while a call transfer or tone override is received
or when dialling is performed during a call using an external line. The call elapsed timer
redisplays five seconds after the last digit is dialled.
During an add-on conference that contains one external line and two internal lines, the
elapsed conference time is displayed on the LCD of all the Multiline telephones involved
in the conference.
The maximum time that can be indicated is 59 minutes and 59 seconds. After 59 minutes
and 59 seconds is reached, the timer resets to 00 minutes and 00 seconds.
The call timer begins counting 10 seconds after seizing an analogue trunk and dialling
the first digit.
Where Line Reversal on Answer is available on an analogue trunk and that trunk is
enabled in function number 112, the call timer will begin counting the moment the outside
party answers the call.
The call timer will begin counting immediately the outside party answers the call when
using an ISDN trunk.
Release 1.0
C-2, Page 39