Call Pickup Group - NEC Xen Alpha Features And Specifications Manual

C-8

Call Pickup Group

Xen Alpha
F This feature allows any user to pickup a call that is intended for another user.
EATURE
D
ESCRIPTION
A call pickup group allows telephones in the system to be grouped together so users can
pick up incoming calls in that group by dialling a preassigned two digit number. Groups are
defined using tenant assignment.
S The feature is available for all Multiline telephones and single line telephones.
TATION
A
PPLICATION
O
PERATION
P
ROCEDURE
Answering a call:
User B performs this procedure to answer a call that is received at user A's telephone.
1.
2.
3.
R All programming functions associated with this feature are listed in the following table. Some
ELATED
P functions must be programmed before the feature is operational and other functions are
ROGRAMMING
optional. The optional functions can affect how the feature operates.
Features & Specifications Manual, Call Pickup Group
A6-506000-642-02
Go off-hook.
Dial the access code. Default access codes are:
J
F
= Pick up CO/PBX calls ringing in a different tenant group
A
F
= Pick up ICM/DID/DIT calls ringing in the same tenant group
Speak with the calling party.
Function
Number
401 Trunk Line Assignment for Tenant 1
402 Trunk Line Assignment for Tenant 2
403 Telephone-to-Tenant Assignment
Function Name
Release 1.0
Required
(Y)es or
(N)o
N
N
N
C-8, Page 55