NEC Xen Alpha Features And Specifications Manual page 150

S Internal Zone Paging
ERVICE
C
ONDITIONS
!
!
!
Internal Paging, General
!
!
!
!
!
!
!
!
!
!
!
!
!
Page 144, I - 6
There are two zones, A and B. The terminals in these zones are assigned by
programming. A terminal can be in zone A and/or zone B, or not in any zone (can be
reached by all internal page).
A page can be simultaneously made to zone A and B.
A busy condition occurs if:
• a page to that zone has already been originated by another station
• an All Call Page has already been originated by another station
• there are no idle stations in the zone
This section applies also to all types of internal paging.
Internal paging must be originated from internal dial tone
The access codes can be stored under an unused line key for One-Touch operation.
Terminals can be barred from receiving an All Call Page in program.
Terminals receiving a page can answer the page by entering Code 74 after going off-
hook and receiving ICM dial tone.
MLT users will not receive an internal page when already engaged on a call. They will
however, receive the page in progress when they become idle.
An incoming trunk call will ring at a reduced volume while an internal page is in progress
on a DTU-Type telephone. Other MLT telephones will receive visual indication of the
incoming call, but will not receive an audible tone.
An internal page will not be heard by any MLT who is receiving a DID, DIT or ICM call.
Single Line Telephone users cannot receive an internal page, but can originate an
internal page or answer an internal page user Meet-Me.
An internal page automatically times out after 90 seconds.
A busy condition is generated upon entering an All Call Page access code if:-
• an All Call Page has already been originated by another station
• there are no idle stations
All call Paging from a 2W or SLT is supported.
A tone burst is generated as a warning tone whenever a page is initiated (by default).
This tone can be disabled in system programming.
Features & Specifications, Internal Zone Paging
A6-506000-642-02