NEC Xen Alpha Features And Specifications Manual page 48

!
S
ERVICE
C
ONDITIONS
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Page 42, C-3
All internal and transferred calls to the telephone follow the forwarding settings assigned
to that telephone.
Any telephone in the system can be the Call Forward destination for any number of other
telephones.
Call Forward – All Calls can be directed to any other telephone in the system even if the
telephone is the member of a different tenant group.
Any telephone in the system can be set to forward all calls to a voice mail port.
Call Forward – All Calls settings can be individually reset for each telephone by clearing
OI I
the setting using
If two internal callers attempt to call one another and they have each other as their Call
Forward – All Calls destination, a busy tone is generated.
The Call Forward – All Calls setting takes precedence over the Call Forward – Busy/No
Answer setting when both are enabled.
When Call Forward – All Calls is assigned to a One-Touch Key and that key is equipped
with an LED, the LED lights red when the Call Forward feature is enabled.
If a telephone is programmed for Direct Inward Termination (DIT), allowing calls to
bypass the attendant and ring directly at a designated extension, Call Forwarding follows
assigned to that telephone.
On DTB-Type telephones, "Call FWD" is displayed in the telephone LCD when the Call
Forward – All Calls is enabled.
Only one Call Forward can be set to the same telephone at one time. The first Call
Forward must be canceled before setting another Call Forward. If multiple Call Forward
destinations are entered, only the last destination is valid; all other entries are canceled.
Only the telephone that is used to originate Call Forward – All Calls can cancel the Call
Forward – All Calls setting.
A maximum of two Call Forward destinations can be "chained." For example, telephone
A is set to forward calls to telephone B and telephone B is set to forward calls to
telephone C. Telephone C attempts to forward to D. Telephone C will be the final forward
destination for both telephones; forwarding to D is not allowed.
Call Forward – All Calls can be set to an internal and external destination
simultaneously. In such a case, DID, DIT and CO Ring Transferred calls will forward to
the external destination and ICM calls will forward tot he internal destination.
A ring assigned trunk call will not follow a Call Forward setting. Only ICM, DID, DIT and
CO Ring Transferred calls will follow a Call Forward setting.
.
Features & Specifications, Call Forward – All Calls
A6-506000-642-02