Flash Key - NEC Xen Alpha Features And Specifications Manual

F-1

Flash Key

Xen Alpha
F If a system is connected to a PBX, it can be programmed to transfer the PBX call to the
EATURE
D system using a flash signal. The duration of the flash signal is assigned in system
ESCRIPTION
programming.
S This feature is available for all Multiline telephones.
TATION
A
PPLICATION
O
PERATION
P
ROCEDURE
Transferring a PBX call:
1.
2.
R All programming functions associated with this feature are listed in the following table. Some
ELATED
P functions must be programmed before the feature is operational and other functions are
ROGRAMMING
optional. The optional functions can affect how the feature operates.
!
S
ERVICE
C
ONDITIONS
!
!
Features & Specifications, Flash Key
A6-506000-642-02
Q
Press (DTB-type telephones) or
Hang up, the call is transferred.
Function
Number
006 Hookflash Duration
Q
Pressing (DTB-type telephones) or
and then reseizes the line after the hookflash duration expires.
If an external line is outgoing restricted (dialling external numbers is denied) and the user
Q
presses and then attempts to dial a restricted number, the external line is dropped
and an error tone is generated.
Q
When is pressed, digits dialed before and after pressing
redial memory locations. If
is cleared.
S
(DTU-type telephones).
Function Name
S
(DTU-type telephones) releases the line
Q
is pressed while dialling, the redial memory location
Release 1.0
Required
(Y)es or
(N)o
Y
Q
are stored in separate
F-1, Page 105