NEC Xen Alpha Features And Specifications Manual page 68

R All programming functions associated with this feature are listed in the following table. Some
ELATED
P functions must be programmed before the feature is operational and other functions are
ROGRAMMING
optional. The optional functions can affect how the feature operates.
!
S
ERVICE
C
ONDITIONS
!
!
!
!
!
!
!
Page 62, C-11
Function
Number
001-4
001-5
001-9 Single Line Telephone Hookflash Assignment
Outgoing trunk line calls can be transferred.
Calls can be transferred to extensions that are members of a different tenant.
If the transferred call is not answered at the destination extension within 30 seconds, the
call recalls to the transferring extension. An alarm tone is generated at the transferring
extension and the telephone's display shows the destination extension number.
Calls can be transferred to a telephone even when the telephone is busy or is in Do Not
Disturb mode.
A 3-party conference can be established while an outside call is in progress by pressing
U
and dialling the number. When the party answers, press
When a call is transferred, the outside line key LED flashes green on the destination
telephone and flashes red on all other telephones in the tenant group.
Transferred calls follow the Call Forwarding that is on the destination telephone
(if enabled).
A single line telephone cannot be used to transfer a call if Function 001-9 (Single Line
Telephone Hookflash Assignment) is set to "Hookflash".
Function Name
Ringing Transfer
Automatic Transfer
Features & Specifications, Call Transfer
Required
(Y)es or
(N)o
N
N
N
P
.
A6-506000-642-02