Removing/Mounting The Pci Bus Hot-Plug Cover - Fujitsu Primergy N800 Manual

System expansions
8.1.3

Removing/mounting the PCI bus hot-plug cover

Figure 17: Removing the PCI bus hot-plug cover
Ê Remove the two holding screws.
Ê Push the cover uniformly ca. 2.5 cm in the direction of the arrow to
disengage the tabs along the front of the cover from the top cover and
remove it.
Mounting is performed in reverse order.
U41243-J-Z156-1-76
Opening/closing the server
87