Fujitsu Primergy N800 Manual page 31

Installing the server
Figure 5: Mounting the server in the rack
Ê Place the server onto the two system brackets. Make sure that the metal
noses grip the notches on the housing.
Ê Fasten the brackets to the right and left hand sides of the server (three
screws each side).
The following steps require only one person.
Figure 6: Telescopic rails with safety springs
Ê Press in the safety springs (1) on both telescopic rails.
U41243-J-Z156-1-76
Mounting the server in the rack
1
2 x
23