Fujitsu Primergy N800 Manual page 67

Configuration software and utilities
Menu item
Base I/O Address 378h
Interrupt
DMA channel
Floppy Disk
Controller
Table 14: I/O configuration options
U41243-J-Z156-1-76
Option Description
Sets the I/O address for the parallel
278h port (178 can only be set in EPP mode.
178h Otherwise, 3BCh is available).
3BCh
IRQ5 Sets the IRQ for the parallel port.
IRQ7
DMA 1 Selects the DMA channel for LPT port
DMA 3 when configured for ECP mode.
Configure the floppy disk drive
controller:
Disabled No configuration
Enabled User configuration
Auto Configuration is determined by BIOS
or operating system.
BIOS Setup
(continued)
59