Ce Certificate; Rfi Suppression; Fcc Notices (Federal Communications Commission) - Fujitsu Primergy N800 Manual

CE certificate

2.3 CE certificate
This device complies with the requirements of EU directives
89/336/EEC "Electromagnetic compatibility" and 73/23/EEC
"Low Voltage Directive". The device therefore qualifies for the CE
(CE=Communauté Européenne) mark on the back of the device.
2.4

RFI suppression

Any other devices which are attached to this product must likewise comply in
respect of RFI suppression with EU directive 89/336/EEC.
Products which meet this requirement are accompanied by a certificate to that
effect issued by the manufacturer and/or bear the CE mark. Products which do
not meet this requirement may be operated only with the special permission of
the BZT (Bundesamt für Zulassungen in der Telekommunikation).
2.5 FCC notices (Federal Communications
Commission)
Class A digital device
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful inter-
ference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
14
Important notes
U41243-J-Z156-1-76