System Expansions; Opening/Closing The Server; Removing The Front Bezel - Fujitsu Primergy N800 Manual

8

System expansions

V
CAUTION!
Observe the safety information in the chapter "Important notes" on
page 11.
This chapter describes how to modify your server hardware (e. g. installing or
removing boards or drives).
Ê If you do not wish to carry out hot-plug operations, then shut down the
operating system; switch the server off and pull the power plugs out of the
power outlet.
8.1

Opening/closing the server

8.1.1

Removing the front bezel

Figure 15: Removing the front bezel
Ê Pull the front bezel in the direction of the arrow and remove it at an angle.
U41243-J-Z156-1-76
85