Server Management Information Submenu - Fujitsu Primergy N800 Manual

BIOS Setup
5.3.6.1 System Management submenu
Menu item
Firmware SMIs
System Event Logging
Clear Event Log
Memory Scrubbing
AERR Enable
Assert NMI on BERR
Assert NMI on PERR
Assert NMI on SERR
Enable Host Bus Error
FPC Error Check
HSC Error Check
Server Management
Information
Table 18: Server Management options
64
Configuration software and utilities
Option Description
Disabled Disables all firmware SMI sources.
Enabled
Disabled Logs critical system events.
Enabled
Disabled Deletes the system event log.
Enabled
Disabled The chipset will deliver corrected
data but will not update the memory
contents.
Enabled The chipset will correct the memory
contents when a correctable error is
detected.
Enable The host bus Address Parity Error
signal (AERR) is enabled for each
processor that supports it.
Disable AERR is ignored.
Disabled Generates an NMI (the Firmware
Enabled SMIs option must be enabled to
assert an NMI).
Disabled Generates an NMI (the SERR option
Enabled is required).
Disabled Generates an NMI.
Enabled
Disabled Allows host single- and multiple-bit
Enabled errors.
Disabled If enabled, BIOS verifies that it can
Enabled communicate with the Front Panel
Controller (FPC).
Disabled If enabled, BIOS verifies that it can
Enabled communicate with the Hot Swap
Controller (HSC).
Selects the System Management Infor-
mation submenu.
U41243-J-Z156-1-76