Advanced Menu - Fujitsu Primergy N800 Manual

Configuration software and utilities
5.3.4

Advanced Menu

V
CAUTION!
Setting incorrect values in this menu may cause your system to
malfunction.
Menu item
Processor Serial Number
Reset Configuration Data No
Use Multiprocessor
Specification
Large Disk Access Mode
Pause Before Boot
Hot-plug PCI Master
Control
Hot-plug PCI Allocation
Level
Time-out on POST Errors Enabled
Table 11: Advanced options
U41243-J-Z156-1-76
Option Description
Disabled Processor serial number control
Enabled
Clears system configuration data.
Yes
1.1 Specifies the multiprocessor specifi-
1.4 cation revision level. Some operating
systems require revision level 1.1. for
compatibility.
CHS Selects the access method for IDE
LBA drives. Most operating systems use
logical block addressing (LBA).
However, some operating systems use
the cylinder head sector (CHS). Refer
to the operating system manual for
further information.
Disabled Causes a 5-second pause before the
Enabled operating system is booted.
Disabled Set this to "Enable" to create the hot-
Enabled plug PCI resource table.
Disabled Set amount of resources to allocate to
Minimum empty hot-plug PCI slots.
Maximum
Operating system boots after 5 sec. of
displaying POST errors.
Disabled Operating system waits for user to
press [F1] or [F2].
BIOS Setup
55