Exit Menu - Fujitsu Primergy N800 Manual

Configuration software and utilities
Menu item Option
Pause Disabled
During Enabled
POST
Table 21: Boot Menu options
5.3.8

Exit Menu

The following menu items are available on the Server menu. Select an item
using the up and down arrows. Press Ú to select this option and follow the
instructions.
Menu item
Exit Saving Changes Exits Setup and saves the changes in CMOS-RAM.
Exit Discarding
Changes
Load Setup Defaults
Load Custom
Defaults
Save Custom
Defaults
Discard Changes
Save Changes
Table 22: Exit Menu items
U41243-J-Z156-1-76
Description
Starts IRTOS manually. When you
hear three beeps, POST has stopped
(press any key to continue).
Description
Exits Setup without saving the changes to CMOS-
RAM.
Loads the Setup default values.
Loads the user-defined default values.
Saves changes to the user-defined default values
(normally, PhoenixBios reads the Setup settings from
CMOS-RAM. However, if CMOS-RAM fails, BIOS uses
user-defined values if such values have been specified.
If not, BIOS uses the factory defaults).
Discards the changes and loads the previous settings
from CMOS-RAM.
Saves the changes to CMOS-RAM.
BIOS Setup
(continued)
67