Color Temperature-Based White Balance - Blizzard Lighting ToughPAR Fab5 User Manual

• RGBW
Enables/disables RGBW color correction.
• POW
Sets the fixture in "Normal" (Low Power, 33% output) or "High" power
mode.
• DIM
Sets the 16-bit dimming curve (OFF=8-bit (standard) dimming, 1-4 are 16-
bit dimming profiles, fastest to slowest).
CAL1
Color Temperature-Based White Values
This menu option allows the user to set the fixture's white output to one of 11
preset or user adjustable color temperatures.
Setting
WT01
WT02
WT03
WT04
To adjust the RGBW settings of any of these preset color temperatures, hit
<ENTER> and then use the <UP> and <DOWN> buttons to select the
desired R/G/B/W value you want to edit. Hit <ENTER>. Use the <UP> and
<DOWN> buttons to change the desired value. Then push the <MENU>
button to confirm your choice and return to the previous menu option. Each
color has the adjustable values of 000 <--> 255 (0% <--> 100%).
CAL2
RGBW Based Values
This is used to setup a custom white balance using R/G/B/W values. Hit
<ENTER> and then use the <UP> and <DOWN> buttons to select the
desired R/G/B/W value you want to edit. Hit <ENTER>. Use the <UP> and
<DOWN> buttons to change the desired value. Then push the <MENU>
button to confirm your choice and return to the previous menu option. Each
color has the adjustable values of 000 <--> 255 (0% <--> 100%).
The ToughPAR Fab5 (s) Manual Rev. A
Color Temp Setting
3200K
WT05
3400K
WT06
4200K
WT07
4900K
WT08
Color Temp
5600K
5900K
6500K
7200K
Page 16
Setting Color Temp
8000K
WT09
8500K
WT10
10000K
WT11
© 2012-13 Blizzard Lighting, LLC