DMX Channel Values In-Depth Photometric Data 5. Appendix A Quick DMX Lesson Troubleshooting Keeping Your Lil’ G™ As Good As New Returns (Gasp!) Shipping Issues Tech Specs Page 2 Lil G™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC...
Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the right to update the existing document or to create a new document to correct any errors or omissions at any time.
Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please visit our support website at: www.blizzardlighting.com/tickets. Page 4 Lil G™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC...
Figure 1: The Lil’ G™ Pin-Up Picture 40-watt Head/Arms LED Source LCD Readout 4-Button Control Panel Figure 2: The Rear Connections Power Switch Fuse Holder DMX Out DMX In Power Input Page 6 Lil G™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC...
Maximum capacitance between conductors – 30 pF/ft. Maximum capacitance between conductor & shield – 55 pF/ft. Maximum resistance of 20 ohms / 1000 ft. Nominal impedance 100 – 140 ohms Page 7 Lil G™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC...
Step 3: Connect other fixtures in the chain from output to input as above. Place a DMX terminator on the output of the final fixture to ensure best communication. Page 8 Lil G™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC...
• Safety cables MUST ALWAYS be used. • Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation. Page 9 Lil G™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC...
DOWN> buttons to scroll through any submenu options. You can the press <ENTER> to save any changes made, or press <ESC> to exit without saving. Page 10 Lil G™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC...
Enter password 988 to disable menu pass- UnLock word protection upon system restart Re- Def- <ENTER> Reset system default settings Reset All <ENTER> Motor reset Page 11 Lil G™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC...
2.) Press the <UP/DOWN> buttons to highlight CH1-CH11, and then press the <ENTER> button. 3.) Every option for CH1-CH11 uses the exact same values of 000-255 as listed on the DMX chart on page 13. Page 12 Lil G™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC...
Make sure all connectors are seated properly and securely. Responding / Use Only DMX Cables. Responding Er- Install a Terminator. ratically Check all cables for defects. Reset fixture(s). Page 15 Lil G™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC...
Damage incurred in shipping is the responsibility of the shipper, and must be reported to the carrier immediately upon receipt of the items. Claims must be made within seven (7) days of receipt. Page 16 Lil G™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC...
Behind every girls selfie is approximately 47 nearly identical photos that just didn’t cut it. 2-year limited warranty, does not cover mal- Warranty function caused by damage to LEDs. Page 17 Lil G™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC...
Page 18
This page intentionally left blank. Page 18 Lil G™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC...
Page 19
This page intentionally left blank. Page 19 Lil G™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC...
Page 20
Enjoy your product! Our sincerest thanks for your purchase! --The team @ Blizzard Lighting...