To set a custom color in Master/Slave/Standalone Mode:
Using this function, you can select any color by adjusting the Red, Green, Blue, and Amber
values from 0-255. You may also adjust the color balance of the fixture.
Please note that modifying the values in this step will affect ALL modes, therefore
we recommend resetting all levels to their highest value (255) after using this
mode.
1.) Select
the <ENTER> button.
2.) Using the <UP>/<DOWN> keys, select the color you wish to display by
varying Red/Green/Blue/Amber intensity between 0 and 255, then hit <ENTER>
to confirm each color choice.
Stuck? Want More
helpful tutorial video
That should tell you everything you need to
Puck Couch Potato RGBA Manual Rev. C
CoLo
then navigate to
Information?
Check out our
HERE:
http://youtu.be/xVKhmV-v0jA
NAnu
from the control panel, then hit
know!
Page 15
Copyright (c) 2013 Blizzard Lighting, LLC