Dmx Mode; Master/Slave Mode; Sound Active Mode; Standalone (Program) Mode - Blizzard Lighting ToughPar Manual

DMX Mode

Allows the unit to be controlled by any universal DMX controller.
1.) The default mode for the fi xture is DMX, which appears as
Readout. To select a different DMX address, using the <MENU> button, select
Addr
,then hit <ENTER>. Use the <UP/DOWN> buttons to select the correct
address, then hit <ENTER> to confi rm.
Stand-Alone, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable
speeds.
1.) To set the fi xture in Flash/Fade mode, select
To confi rm, press the <ENTER> button.
2.) Now, select the fl ash or fade speed using <MENU> button to reach
then hit <ENTER>.
The display reads
TER> button to confi rm.
3.) To use the fi xture in automatic mode, select
TER> button to confi rm.
4.) Adjust the speed of the chase as above using
(fastest) then press the <ENTER> button to confi rm.
5.) To set the fi xture as a slave unit, select
will display a fl ashing
Sound Acitve Mode:
1.) To use sound active mode, select
to confi rm.

Standalone (Program) Mode:

Allows a single unit to display a variety of colors and programs without a DMX controller.
1.) To set the fi xture in manual mode, select
To confi rm, press the <ENTER> button.
2.) Now, select the program by using the <UP> and <DOWN> buttons to select
Pr00-Pr15

Manual Color Adjustment:

Allows the user to adjust the color balance of the fi xture. These settings are global, they
will effect all modes.
1.) Use the <MENU> and <UP/DOWN> button to select
GL--
(Green Level),
(White Level), then hit <ENTER>.
2.) Using the <UP/DOWN> buttons, select the maximum level for each color
x000-x255
between
ToughPAR RGBAW Manual Rev. A
SP15 SP00
(slowest) to
SL-U
to indicate it is in slave mode.
SouA
. To confi rm, press the <ENTER> button.
bL--
(Blue Level),
(000=off), then hit <ENTER> to confi rm.
Page 12
d001
FLAS or FAdE
(fastest), then press the <EN-
ASC-
, then press the <EN-
SP15
(slowest) to
SLAV
, and hit <ENTER>. The unit
, then press the <ENTER> button
Pr--
.
rL--
(Red Level),
AL--
(Amber Level), or
Copyright (c) 2011 Blizzard Lighting, LLC
on the LED
SP--
,
SP00
UL--