Dmx Channel Mode + Starting Address; Master/Slave Mode; Manual Color Mixing; Color Presets - Blizzard Lighting LB HEX Unplugged User Manual

DMX Channel Mode + Starting Address:

1.) Navigate the main menu until you reach either d13-- (13ch mode),
or d.8-- 8ch mode, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to select a starting DMX address
ranging from 1-512, and press the <ENTER> button to confirm.

Master/Slave Mode:

1.) Daisy chain fixtures DMX input/output connections.
2.) Set the DMX channel mode on fixtures to match either d.13 or d.8.
3.) The first fixture in the DMX chain is the master fixture, and the
following fixtures will follow the master.

Manual Color Mixing:

1.) Navigate the top level of the menu to reach either r--- (red), g---
(green), b--- (blue), A--- (amber), P--- (UV), or n--- (white), and then
press the <ENTER> button.
2.) Use the <UP/DOWN> buttons to adjust intensity level anywhere
from 000-255 (0% <--> 100%), and press <ENTER>.

Color Presets:

1.) Navigate the main menu until you reach pr--, and press <ENTER>.
2.) Then use the <UP/DOWN> buttons to select a value ranging from
1-25 (see p. 12), and press <ENTER>.

Strobe Effects:

1.) Navigate the main menu until you reach F---, and press <ENTER>.
2.) Then use the <UP/DOWN> buttons to select a strobe speed setting
from 0-255 (slow <--> fast), and press <ENTER>.

Built-in Programs/Sound Active Mode:

1.) Navigate the main menu until you reach C--- (7-color fade), J---
(7-color jump), or S--- (sound active) and press <ENTER>.
2.) Then use the <UP/DOWN> buttons to select a speed setting from
0-255 (slow <--> fast), and press <ENTER>.

Dimming Curve Settings:

1.) Navigate the main menu until you reach dr--, and press <ENTER>.
2.) Highlight dr-0 to dr-04, and press <ENTER> to confirm.

Power Saving/Temperature Control:

1.) Navigate the main menu until you reach TL--, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight TL-0 to TL-02.
3.) TL-0 automatically reduces the LED output to 50% when the internal
temperature reaches 75°C, TL-1 is constant half power, and TL-2 is
constant full power. Press <ENTER> to confirm your choice.
4.) Press and hold <ENTER> for 5s to display the current temperature.
LB Hex™ Unplugged Manual Rev. A
Page 13
© 2018 Blizzard Lighting, LLC