Control Panel Menu Structure; Dmx Mode; Master/Slave Mode; Sound Active Mode - Blizzard Lighting ProBar RGB Manual

Control Panel Menu Structure

ProBar LED Manual Rev. A
Page 11
Copyright (c) 2010 Blizzard Lighting, LLC

DMX Mode

Allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with
DMX, please read the DMX Primer on page #15.
1.) The default mode for the fi xture is DMX, which appears as
Readout.
2.) The fi xture can also be set in "Fixture Address Mode," where each fi xture uti-
lizes 16 DMX channels. Use the <UP> and <DOWN> buttons to get to
then hit <ENTER>.
3.) Select the fi xture number between
Ch#001, F002 = DMX Ch #017, etc.), then hit <ENTER> to confi rm.
Master/Slave Mode (Auto or Sound Active):
Allows you to link up to 32 units together without a controller.
1.) Use standard DMX cables to daisy chain your units together via the DMX con-
nector on the rear of the units. It may be necessary to use a terminator at the
last fi xture. For more information about terminators, see page 8.
2.) Choose a unit to function as the Master. Select the mode you want to use,
between . The master unit must be the fi rst unit. Finally, chain the units to-
gether using DMX cable.
NASt
Master then
3.) Select slave function by using the <UP>/<DOWN> keys to reach SLAV in
the Master/Auto menu on the slave units, and they will react in the same as the
Master.
SLA
Slave then
Auto
Select either or
then
Stand-Alone Mode (Progam Mode):
Allows a single or Master/Slaved units to run to one of four factory installed programs at
user selectable speeds.
1.) To set the fi xture in Program mode, select
To confi rm, press the <ENTER> button while the display reads
2.) Now, select programs C1-C4 by using the <UP> and <DOWN> buttons,
then press the <ENTER> button to confi rm while the display reads
3.) Finally, select the program speed by using the <UP> and <DOWN> buttons,
P255
to adjust the speed from
Manual Mode (Color Preset Mode):
Allows a single unit to display any of 16,700,000 colors without a DMX controller.
1.) To set the fi xture in manual mode, select
To confi rm, press the <ENTER> button while the display reads
2.) Now, choose the color you would like to adjust by using the <UP> and
rEd
<DOWN> buttons to select
Page 12
ProBar RGB Manual Rev. A
A001
on the LED
F---
F001 F255
and . (Hint: F001 = DMX
YES
to confi rm.
YES
to confi rm.
SUNd

(Sound Active mode)

YES
to confi rm.
PrOG
.
YES
.
YES
P001
(slowest) to (fastest).
NaN
.
YES
.
GrE bLU
, or .
Copyright (c) 2010 Blizzard Lighting, LLC
,
.