Edit Programs & Scenes; Advanced Setup Functions - Blizzard Lighting ToughPAR Fab5 User Manual

EdIT
Edit Scenes & Programs
Create/edit up to 10 programs of up to 30 scenes for playback in standalone
mode, (from the "Auto" menu).
•
PR01-PR10
•
SC01-SC30
To edit these programs and scenes:
•• R000-R255
••
G000-G255
••
B000-B255
••
Y000-Y255
••
W000-W255
••
ST00-ST20
••
T000-T255
••
F000-F255
SET

Advanced Setup Functions

The following options sets the fixture's advanced functions:
• UPLd
This allows you to upload you own user-created custom programs to other
ToughPAR™ Fab5 fixtures. You must set any fixtures which will receive the
new programming to SLAVE mode, then on the master unit, enter the lock
password (UP/DOWN/UP/DOWN/ENTER), then press enter to confirm.
The fixtures will display yellow while uploading is in progress, and will turn
green once uploading is complete.
• REST
Factory reset. Use this to reset the Puck Pro Zoom fixture back to its
original factory installed settings.
• Id
Enables/disables ID address operation.
The ToughPAR Fab5 (s) Manual Rev. A
- Program numbers 1-10
- Scene numbers 1-30
- Red Intensity (0% <--> 100%)
- Green Intensity (0% <--> 100%)
- Blue Intensity (0% <--> 100%)
- Amber Intensity (0% <--> 100%)
- White Intensity (0% <--> 100%)
- Strobe Speed (Slow <--> Fast)
- Scene Time (0% <--> 100%)
- Fade Time (0% <--> 100%)
Page 15
© 2012-13 Blizzard Lighting, LLC