Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the right to update the existing document or to create a new document to correct any errors or omissions at any time.
Under normal operating conditions, the fuse should not require replacement. The fuse is field replaceable, however it is an advanced procedure suited to qualified individuals. Should your HotBox™ 5 RGBAW fuse require replacement, please con- tact Blizzard Lighting for instructions, or to return your unit for service. Connecting A Bunch of HotBox™ 5 Fixtures You will need a serial data link to run light shows using a DMX-512 controller or to run shows on two or more fixtures set to sync in mas- ter/slave operating mode. The combined number of channels required...
® unapproved fixtures may cause damage to the wiCICLE ® fixture. UNDER NO CIRCUMSTANCES IS BLIZZARD LIGHTING RESPONSIBLE FOR ANY DAMAGE FROM SUCH OPERATION. • Fixtures bearing the above logo MUST only use cable and connec- tors which separate chassis/case ground from cable shielding. Cabling with the shield connected to the connector’s case/chassis may cause...