Custom Program Playback; Sound Active Mode; Set A Custom Color In Standalone Or M/S Mode; Manual Color Adjustment (Global) - Blizzard Lighting ProPar Seven.6 User Manual

Custom Program Playback:

1.) Navigate the menu using the <UP/DOWN> button until you reach chAS.
2.) Push the <ENTER> button.
3.) Use the <UP/DOWN> buttons to navigate to ProG, and press <ENTER>.
4.) Press the <ENTER> button again, and use the <UP/DOWN> buttons to navigate the
custom programs from Pr.01-Pr.06,
5.) Press the <ENTER> button to confirm your program selection.
6.) Use the <UP/DOWN> buttons to select the speed from t0.01-t0.30 (fast <-> slow).

Sound Active Mode:

1.) Navigate the menu using the <UP/DOWN> button until you reach SoUd.
2.) Push the <ENTER> button.
3.) Use the <UP/DOWN> buttons to navigate to ProG, and press <ENTER>.
4.) Use the <UP/DOWN> buttons to select from Snd.1-Snd.4, and press <ENTER>.
5.) Use the <UP/DOWN> buttons to adjust the mic sensitivity level from Sd.00-Sd.99
(0%<->100%), then press the <ENTER> button to confirm.
To set a custom color in Standalone or M/S Mode:
Allows you to create any custom mixed color by adjusting the Red, Green, Blue, Amber, White and UV
values from 0-255.
1.) Navigate the menu using the <UP/DOWN> buttons until you reach StAt.
2.) Push the <ENTER> button.
3.) Press the <UP/DOWN> button until you reach either r.--- (Red), G.--- (Green), b.---
(Blue). A.--- (Amber), U.--- (White), or u.--- (UV) then press <ENTER>.
4.) Using the <UP/DOWN> buttons, select the maximum level for each color between
x.000-x.255 (000=off), then press <ENTER> to confirm.

Manual Color Adjustment (Global):

Using this function, you can select any color by adjusting the Red, Green, Blue, Amber, White and UV
values from 0-255. Please note that modifying the values in this step will affect ALL modes, therefore
we recommend resetting all levels to their highest value (255) after using this mode.
1.) Navigate the menu using the <UP/DOWN> buttons until you reach SEt.
2.) Push the <ENTER> button.
3.) Press the <UP/DOWN> button until you reach cUrr, then press <ENTER>.
4.) Press the <UP/DOWN> button until you reach either r.--- (Red), G.--- (Green), b.---
(Blue). A.--- (Amber), U.--- (White), or u.--- (UV) then press <ENTER>.
5.) Using the <UP/DOWN> buttons, select the maximum level for each color between
x.000-x.255 (000=off), then press <ENTER> to confirm.

Temperature Settings

Allows you to set a designated temperature protection cut off (in celsius degrees), and also displays
the current fixture temperature.
1.) Navigate the menu using the <UP/DOWN> buttons until you reach tENP.
2.) Push the <ENTER> button.
3.) Use the <UP/DOWN> buttons to select either cUtP or toP.
4.) Press the <ENTER> button to confirm.
5.) cUtP will display the current internal temperature, and toP will then allow you to set the
maximum temperature allowed before the temperature protection cut off is initiated.
ProPAR 7.6 Manual Rev. A
Page 13
© 2014 Blizzard Lighting, LLC