Menu Key Protection; Static Color Display; Automatic Programs; Run Mode - Blizzard Lighting ToughPAR Fab5 User Manual

KEY

Menu Key Protection

To enable the menu key protection, the menu setting must be set to
feature allows you to protect the control panel from unauthorized access using
a security key which is: (Up, Down, Up, Down, Enter). To disable, simply set
the value to
STAT
Static Color Display + Strobe
Allows you to display a static custom color using RGBAW color values.
Hit <ENTER> and then use the <UP> and <DOWN> buttons to select the
desired R/G/B/A/W value you want to edit. Hit <ENTER>. Use the <UP>
and <DOWN> buttons to change the desired value. Then push the <MENU>
button to confirm your choice and return to the previous menu option. Each
color has the adjustable values of 000 <--> 255 (0% <--> 100%). Strobe can
also be applied,
AUTO
Automatic Programs (Built-In and Custom)
This feature allows you to select from one of 10 built-in programs, or to select
one of 10 user-defined programs of up to 30 steps.
• AT.01-AT.10
• PR.01-PR.10
RUN

Run Mode

This is where you set the fixture to either DMX/Master or Slave Mode
• DMX
• SLAV
The ToughPAR Fab5 (s) Manual Rev. A
.
OFF
ST.00 ST.20
<-->
- Built-In Programs
- User-Defined Programs
- Set the fixture as the master
- Set the fixture as a slave
(slow <--> fast).
Page 17
.
ON
This
© 2012-13 Blizzard Lighting, LLC