Input Switching & Pip Menu - Christie DHD675-E User Manual

4.6 Input Switching & PIP Menu
NOTE:
Reference the compatibility table found in Section 6.2.
™
Main Input
From the list of active inputs, select one to be used as the main image.
PIP/PBP Input
From the list of active inputs, select one to be used as the PIP/PBP.
PIP/PBP Enable
Toggle between displaying two sources at once (Main and PIP/PBP images)
or one source only. The check box turns the PIP/PBP source ON and OFF.
Swap
Change the main image to PIP/PBP, and the PIP/PBP to main image.
Swapping is available only when PIP/PBP is enabled.
Size
Select the PIP/PBP size to small, medium or large.
Layout
Set the location of the PIP/PBP image on the screen.
E Series User Manual
020-000515-01 Rev. 2 (03-2013)
Section 4: Operation
4-19