Table of Contents
Advertisement
2.
Insert the locking pin through the holes in the stacking legs. Make sure
each pin is fully inserted.
NOTE: The steel ball on the end of the pin keeps the pin from releasing inadvertently.
™
3.
When required, repeat steps 1 and 2 for the third projector in the stack.
3.9.4 Stacking Alignment
Stacked projectors must be correctly aligned to one another so the resulting
display is optimized. If hoisting the stack, do so first and then align. To align
the image, use pitch, yaw, or roll. Prior to aligning the image, turn the locking
nut to unlock then use the knob to adjust the image.
NOTE: Ensure to lock the locking nut to maintain the image adjustment.
™
+/- Roll
Note: If the projector is parallel to the screen, some keystone will
be introduced with pitch and yaw adjustment.
E Series User Manual
020-000515-01 Rev. 2 (03-2013)
Stacking
Leg
Press botton to
remove or install
the pin
Steel Ball
+/- Pitch
Hole
Pin
Inserted
Pin
Pitch
Adjustment moves the
image up and down
Roll
Rotates the image clockwise
and counter-clockwise
Pitch
Adjustment moves the
image left and right
+/- Yaw
Section 3: Installation
LOCKING
KNOB
NUT
3-13
Hide quick links:
Advertisement
Table of Contents
