Christie DHD675-E User Manual page 10

Section 2: Introduction
Ind.
1 Lens door
2 Front IR Sensor
3 Projection Lens
4 Cooling Air Vents
5 Adjustable Feet
6 LED Status Indicators
7 Rear IR Sensor
8 Lamp Door (Screws)
9 Built-in Keypad
Input/Output (I/O)
10
Panel
2-2
Part Name
Use the lens door to access the lens module.
Receives signals from the IR remote. Keep the signal
path to the sensor unobstructed for uninterrupted
communication with the projector.
Allows automated lens control and adjustment: vertical
and horizontal offsets, zoom and focus.
Keep these vents unobstructed to prevent the projector
from overheating.
Raise or lower the feet to level the projector.
Displays the status of the projector. They are (from left
to right): LAMP 1, LAMP 2, STATUS and PIC MUTE.
Receives signals from the IR remote. Keep the signal
path to the sensor unobstructed for uninterrupted
communication with the projector.
Use the lamp to access to the lamp module.
Controls the projector.
Connects the projector to external devices.
Description
E Series User Manual
020-000515-01 Rev. 2 (03-2013)