Table of Contents
Advertisement
adjusted to optimize picture quality.
Color wheel Index (3x): Set Color wheel index to Speed 3X. This setting
y
only needs to be used when the Main Board is changed, and should be
adjusted to optimize picture quality.
Error log: Show the projector error log for debug.
y
Mode Adjustment: Fine tune the H and V start position for a signal in the
y
EDID timing table and record the values in the system to override the
timing table. The settings must be "Saved to Record" before exiting the
menu, or they will be lost. To revert to original timing table settings, each
setting must be manually cleared. Factory Defaults will not clear these
override settings.
E Series User Manual
020-000515-01 Rev. 2 (03-2013)
Section 4: Operation
4-15
Hide quick links:
Advertisement
Table of Contents
