Tools - Christie DHD675-E User Manual

Section 4: Operation
- SNMP Location (default setting: blank) – This field can be used
as a description to where a projector is located in a building.
SNMP emails sent will specify this location.
- Trap IP Address (default setting: 0.0.0.0) – This field must be
filled in to receive Traps from the projector. The Trap IP Address
should be filled in with the IP Address of the computer on which
you would like to view received traps.
- Trap Email 1/2 (default setting: Blank) – The Trap Email 1 and 2
must be set to an email address that is configured under the mail
server that you will enter in the "SMTP Server IP Address" field.
- Email from Address (default setting: blank) – the "Email from
Address" that will appear as the source of the SNMP emails.
- SMTP Server IP Address (default setting: 0.0.0.0) – Enter your
mail server's IP address.
Trap Configuration Panel
y
Set the SNMP actions for the system events. The dropdown options
are: SNMP Trap + Email, Email, SNMP Trap, and Disabled.

4.9.6 Tools

Use the Tools tabbed pages to control "Size & Position", "Image
Settings", "Configuration", "Lamp", "Input Switching & PIP" and "Test
Pattern".
4-26 E Series User Manual
020-000515-01 Rev. 2 (03-2013)