To set a custom color in Master/Slave / Standalone Mode:
Using this function, you can select any color by adjusting the Red, Green and Blue values
from 0-255. You may also adjust the color balance of the fi xture.
Please note that modifying the values in this step will affect ALL modes, therefore
we recommend resetting all levels to their highest value (255) after using this
mode.
1.) Select
2.) Choose
3.) Using the <UP>/<DOWN> keys, select the color you wish to display by
varying Red/Green/Blue intensity between 0 and 255, then hit <ENTER> to
confi rm each color choice.
4.) Select Color preset mode as instructed above, then select
<ENTER> to confi rm.
To Show the Fixture Running Hours:
1.) Select
Stuck? Want More
helpful tutorial video
http://youtu.be/xVKhmV-v0jA
That should tell you everything you need to
The Puck 3NX Manual Rev. B
NAnu
from the control panel, then hit <ENTER>.
rEd, GrEE
bLuE
, or
FhrS
from the control panel, then hit <ENTER> to confi rm.
Information?
Check out our
HERE:
know!
Page 9
, then hit <ENTER> to confi rm.
Copyright (c) 2011-2012 Blizzard Lighting, LLC
CoL 7.
then